Page Comparison

Image Removed

title

Panel

The Exterior Overcut for V-Grooves controls where the Blade Retracts from the Matboard(not the Fallout)on the Exterior cuts of the Outside Cut of the V-Groove.
The Exterior Cut is where the Blade Plunges/Retracts from the Matboard (not the Fallout).
- If the Exterior Overcut on the Outside Cut of the V-Groove is cut Outside cuts Too Long, Decrease the Exterior Overcut.
- If the Exterior Overcut on the Outside Cut of the V-Groove is cut Outside cuts Too Short, Increase the Exterior Overcut.

Expand

Insert excerpt

	How to Adjust the Configurations
	How to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.


name	How to Adjust Configurations
nopanel	true

Image Added

Excerpt

hidden	true
name	Exterior Overcut for V-Grooves Definition

The Exterior Overcut for V-Grooves controls where the Blade Retracts from the Matboard(not the Fallout)on the Exterior cuts of the Outside Cut of the V-Groove.
The Exterior Cut is where the Blade Plunges/Retracts from the Matboard (not the Fallout).
- If the Exterior Overcut on the Outside Cut of the V-Groove is cut Outside cuts Too Long, Decrease the Exterior Overcut.
- If the Exterior Overcut on the Outside Cut of the V-Groove is cut Outside cuts Too Short, Increase the Exterior Overcut.

Full Definition: Exterior Overcut for V-Grooves Definition

Versions Compared