Page Comparison

• The Interior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior Cuts of objects.

• The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).  

  • If the Interior Overcut is cut Too Long, Decrease the Interior Overcut.

  • If the Interior Overcut is cut Too Short, Increase the Interior Overcut.

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.