Page Comparison

• A Swoop on the Outside cut of the V-Groove is where the corners Curve Inward toward the opening.

  If the Outside cut of the V-Groove cuts with a Swoop, Decrease the Outside Rotation.

• A Flare on the Outside cut of the V-Groove is where the corners Curve Away from the opening.

  If the Outside cut of the V-Groove cuts with a Flare, Increase the Outside Rotation.

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.