Versions Compared

Version Old Version 31 New Version 32
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel
panelIconIdatlassian-plus
panelIcon:plus:
panelIconText:plus:
bgColor#FFFAE6

  • The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior Cuts of Openings.

  • The Exterior Cuts is where the Blade Plunges/Retracts from the Matboard (not the Fallout).  

Expand
titleHow to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Excerpt
hiddentrue
nameExterior Overcut Definition

  • The Exterior Overcut controls where the Blade Retracts from the Matboard (not the Fallout) on the Exterior Cuts of Openings.

  • The Exterior Cuts is where the Blade Plunges/Retracts from the Matboard (not the Fallout).  

    • If the Exterior Overcut is cut Too Long, Decrease the Exterior Overcut.

    • If the Exterior Overcut is cut Too Short, Increase the Exterior Overcut.