Page Comparison

Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options.

For Additional Information:

See Matboard Properties in the Design to turn on/off the Outside cut.

Select Options Menu > Cut Outside on the Cut Previewto cut the outside of the mat. See /wiki/spaces/FrameShop8x/pages/1942506497 on the Cut Previewto turn on/off the Outside cut.See Enable Outside Cutunder Advanced Outside Options on the Cut Previewto toggle on/off the Outside cut.See Cut Outside Using 90 Degree Tool under Set Advanced Optionson the Cut Preview.

See Cut Mode in the Set Advanced Options section on the Cut Preview.

See Shared Edge for the Cut Mode in the Set Advanced Options section on the Cut Preview.

See Full for the Cut Mode in the Set Advanced Options section on the Cut Preview.

See As Designed for the Cut Mode in the Set Advanced Options section on the Cut Preview.

Set Advanced Options: Remnant Trimming

Info
Select the desired Remnant Trimming direction on the CMC Z1, Z (9000z), 9000 and 8000+ from the Remnant Trimming dropdown control. This will trim off the remaining section of the matboard to make it easier to store the remaining pieces for future use.

Tip
Default Settings: Cut the Outside: Editor Default Setting Advanced Outside Settings: Cutting Default Setting Cut Mode: Cutting Default Setting 90 Degree Outside: Cutting Default Setting Tiling Defaults: Cutting Default Setting Sheet Size: Cutting Default Setting Tiling Spacing: Cutting Default Setting Remnant Trimming: Cutting Default Setting

Expand

title	Remnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

See: Remnant Trimming Function

Make the desired selection for the Remnant Trimming as desired.
Click OK.
The CMC will cut with these settings.

Expand

title	Remnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

See: Remnant Trimming Function

Versions Compared

Old Version 26

New Version 27

Key

Contents:

Set Advanced Options: Remnant Trimming

Contents: