Page Comparison

V-Groove Outside Cut has a Flare

If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.

Panel

For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval V-Groove.the Configurations

Expand

title	Outside V-Groove Flare Definition

A Flare on the Outside cut of the V-Groove is where the corners Curve Away from the V-Groove.

If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.

The Rotation on V-Grooves controls for Swoopsor Flareson V-Grooves.

Expand

title	How to Adjust the Inside or Outside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.