Page Comparison

• For Additional Information:

• See Troubleshooting Utility for information on adjusting for a Feather or Bump in an Oval.

• See Circle/Oval Rotation Utility to adjust for a Feather or Bump in an Oval.: Configurations Screen

• Troubleshooting Utility for the Configurations

A Bump in an Oval Openingis a Lumpof material left behind where the cut started and ended.

If the Oval Opening has a Bump, Increasethe Oval Rotation.

The Oval Rotation controls for Bumps or Feathers/wiki/spaces/FrameShop8x/pages/1942510997on an Oval Opening.

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.