Versions Compared

Version Old Version 3 New Version 4
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Drawing a Line

  • Click the Line button.

  • Click to place the two points of the Line:

    • Start Point

    • End Point

  • The drawn Line displays a Center Point which can be used to turn the Line into an Arc.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information:

  • See Line Design Details for details displayed on the selected Line.

  • See Continuous Drawing to draw continuously without having to restart the current Drawing Tool command.

  • See the Auto Align Circuitsfeature to display alignment lines when the cursor lines up with the control points of another object.

Expand
titleHow to Snap to Control Points When Drawing

Left-Click sets the Point under the Cursor.

Right-Click Snaps to the nearest Point.

Hold down the CTRL key to draw in Ortho Mode; i.e., Horizontally/Vertically only.

Expand
titleLine Tool Definition

The Line/wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an /wiki/spaces/FrameShop8x/pages/1942509136.

See: Line Tool Function