Page Comparison

• Use the Cut from Front toggle to select whether you want to cut from the Front or the Back of the mat.

• Mats containing elements that are administered to the Front of the mat (i.e., Deboss, Pen, V-Grooves, etc.,) will still force it to cut from the Front. 

• The elements will be applied to the Front of the mat, and any Openings on that layer will also cut from the Front of the mat.

• For Additional Information: 

• See Options > Switch Between Front and Normal Tools on the Cut Preview.

• See Options > Always use Normal Tool on the Cut Previewto toggle on/off this feature.

• See Options > Cut From Front on the Cut Previewto select whether to cut the design from the Front of the mat.

• See Options > Cut Front Tool on the Cut Previewto designate which cartridge to use when cutting from the front of the mat.

• Default Settings:

• Cut from Front: Cutting Default Setting

• Cut From Front Blade Cartridge Selection: Cutting Default Setting

Cutting from the Back will cut with the back of the mat toward the operator, and can be selected on the Cut Preview.

• On the Configurations screen the Current Bevel Type dropdown control will display the bevel types in this manner:

  • Cut from the Back bevel type names will be displayed with no further label; i.e., Normal Bevel.

  • Cut from the Front bevel type names will be displayed with a Front label; i.e., Normal Bevel-Front of Mat.

  • V-Grooves have their own selection on the list.

If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat.

So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening.