Page Comparison

Blade Depth Software

Click on the Blade Depth button to open the Blade Depth Screen.
Enter the Blade Depth for the current layer if different than the selected depth.

On the CMC Z1, setting the Blade Depth in the software will automatically set the Blade Depth in the hardware.
The Z1 will automatically adjust the physical Blade Depth of the CMC to this value when you click Continue.
Click Continue to cut.

Panel

For Additional Information:
See the Blade Depth Field on the Cut Previewfor more information on the Blade Depth Entry Field.
See the Blade Depth Button on the Cut Previewfor more information on setting the software Blade Depth.
See the Blade Depth Quick Select on the Cut Previewfor more information on the Blade Depth Quick Select dropdown control.
See Assign SKU to Layer for more information on Assigning a SKU to a Layer on the Cut Preview to post the correct blade depth for that SKU if it contains a mat thickness.

Optionally, click the Blade Depth Quick Select button which is displayed as the mat corner sample at the top of the screen on the Cut Preview Screen.
Select the desired preset Blade Depth for the current layer from the dropdown control.
The selected Blade Depth will be applied to the current Layer.

Tip
Default Settings: See Default Opening Blade Depth: Cutting Default Setting for the default settings for the default Blade Depth. See Default Blade Depths: Cutting Default Setting for the default settings for theBlade Depth Quick Selectdropdown control.