Page Comparison

• The Cutting Cut Preview will display Back if the current layer is cutting from the Back of the mat. 

• For Additional Information: 

• See Options > Cut From Front on the Cut Previewto select whether to cut the design from the Front of the mat.

• Select Cut From Front toggle to select whether to cut the design from the Front of the mat on the Cut Preview.

• Default Settings: See Admin > Cuttingfor the default settings for Cutting from the FrontorBack.

Cutting from the Back will cut with the back of the mat toward the operator, and can be selected on the Cutting Cut Preview.

• On the Configurations screen the Current Bevel Type dropdown control will display the bevel types in this manner:

  • Cut from the Back bevel type names will be displayed with no further label; i.e., Normal Bevel.

  • Cut from the Front bevel type names will be displayed with a Front label; i.e., Normal Bevel-Front of Mat.

  • V-Grooves have their own selection on the list.

If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat.

So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening.