dani.simmonds
Sept 20, 2024
The Cut Current Mat button will bring the current design to the Cut Preview Screen to Cut.
For Additional Information: Optionally, click File > Send to CMC to send the current design to the Cut Preview.
Have the Traced design open in Trace.
Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.
The Set Bevels Tab in Trace contains the tools needed to Trace the design.
See: Tracing the Design
Click on the Cut Current Mat button.
The design opens up on the Cut Preview Screen.
