Versions Compared

Old Version 3

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 4

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Bevel Type V-Groove Selection

Info

  • Select the desired V-Groove type from the dropdown control. 

  • Select the desired object you wish to Trace.

  • Select the desired Bevel Type/Cartridge Type from the Bevel and Cartridge Types dropdown control.

  • Click the Set button next to it to Trace it.

  • The object will change to the selected Bevel Type/Cartridge Type color.

Expand
titleInGroove and OutGroove

Note that the OutGroove (outside cut of the V-Groove) and InGroove (inside cut of the V-Groove) bevels cannot be saved with the design, so the design must be taken directly to the Cutting Preview after tracing it.

Expand
titleBevel Type Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Expand
titleV-Groove Definition

The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Closed V-Groove Configurations

See: 45 Degree Plus Closed V-Groove Configurations

See: 45 Front Closed V-Groove Configurations

See: 52 Degree Closed V-Groove Configurations