Page Comparison

Use the Cut the Outside toggle to select Cutting or Not Cutting the Outside of the mat.

For Additional Information:

See Matboard Properties in the Design to turn on/off the Outside cut.

Select Options Menu > Cut Outside on the Cut Previewto cut the outside of the mat.

See /wiki/spaces/FrameShop8x/pages/1942506497 on the Cut Previewto turn on/off the Outside cut.

See Enable Outside Cutunder Advanced Outside Options on the Cut Previewto toggle on/off the Outside cut.

See Cut Outside Using 90 Degree Tool under Set Advanced Optionson the Cut Preview.

See Cut Mode in the Set Advanced Options section on the Cut Preview.

See Shared Edge for the Cut Mode in the Set Advanced Options section on the Cut Preview

See Full for the Cut Mode in the Set Advanced Options section on the Cut Preview.

See As Designed for the Cut Mode in the Set Advanced Options section on the Cut Preview.

See Remnant Trimming in the Set Advanced Options section on the Cut Preview.

Default Settings:

See Admin > Editor to set the default of whether or not to Cut the Outside.

See Admin > Editor for the default settings for Cutting the Outside.

See Admin > Cutting for the default settings for the Advanced Options.

See Admin > Cutting for the default settings for the Cut Mode.

See Admin > Cutting for the default settings for 90 Degree Outside.

See Admin > Cutting for the default settings for Tiling.

See Admin > Cutting for the default size for the Spacing between designs.