changes.mady.by.user dani.simmonds
Saved on Aug 22, 2024
Click the Line button.
Click to place the two points of the Line:
Start Point
End Point
The drawn Line displays a Center Point which can be used to turn the Line into an Arc.
For Additional Information:
See Line Design Details for details displayed on the selected Line.
See Continuous Drawing to draw continuously without having to restart the current Drawing Tool command.
Left-Click sets the Point under the Cursor.
Right-Click Snaps to the nearest Point.
Hold down the CTRL key to draw in Ortho Mode; i.e., Horizontally/Vertically only.
The Line/wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line.
The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).
After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an /wiki/spaces/FrameShop8x/pages/1942509136.
See: Line Tool Function
