Page Comparison

Versions Compared

Key

This line was added.
This line was removed.
Formatting was changed.

Traced Object Type

Select the desired Bevel/Cartridge Type that you wish to change the cut order from the Bevel/Cartridge Type Selection.
- Only the objects matching the bevel/cartridge type selection will be displayed.
- The other Bevel/Cartridge Type of the design on the screen will be grayed out.

Expand

title	Bevel Type Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Expand

title	Cartridge Definition

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

For instance, selecting Openings will only display and allow you to change the Openings.
When you move your cursor across the design, only the Openings will be available to be selected and edited.

Changing the Cut Order

Select Openings on the Traced Object Type section.
Select the desired Opening.
Select Cut Later.
The Cut Order of the selected opening will change from within the other openings on the design, making the selected opening cut one opening later.
You can click the button again to move it again within the Cut Order.

Image Removed