Page Comparison

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended on the Oval.

If the Oval Opening has a Feather, Decrease the Oval Rotation.

The Oval Rotation controls for Bumps or Feathers on an Oval.

See: Oval Rotation for Openings Configurations

A Bump in an Oval Openingis a Lumpof material left behind where the cut started and ended.

If the Oval Opening has a Bump, Increasethe Oval Rotation.

The Oval Rotation controls for Bumps or Feathers/wiki/spaces/FrameShop8x/pages/1942510997on an Oval Opening.

See: Oval Rotation for Openings Configurations/wiki/spaces/FrameShop8x/pages/1942501772

A Feather in an Oval Drop is a Fringe of material left behind where the cut started and ended on the Oval.

If the Oval Drop has a Feather, Decrease the Oval Rotation.

The Oval Rotation controls for Bumps or Feathers/wiki/spaces/FrameShop8x/pages/1942510997on an Oval.

See: Oval Rotation for Drops Configurations

A Bump in an Oval Dropis a Lumpof material left behind where the cut started and ended.

If the Oval Drop has a Bump, Increasethe Oval Rotation.

The Oval Rotation controls for Bumps or Feathers/wiki/spaces/FrameShop8x/pages/1942510997on an Oval Opening.

See: Oval Rotation for Drops Configurations

A Feather in an Oval Outside is a Fringe of material left behind where the cut started and ended on the Oval.

If the Oval Outside has a Feather, Decrease the Oval Rotation.

The Oval Rotation controls for Bumps or Feathers/wiki/spaces/FrameShop8x/pages/1942510997on an Oval.

See: Oval Rotation for the Outside Configurations

A Bump in an Oval Outsideis a Lumpof material left behind where the cut started and ended.

If the Oval Outside has a Bump, Increasethe Oval Rotation.

The Oval Rotation controls for Bumps or Feathers/wiki/spaces/FrameShop8x/pages/1942510997on an Oval Opening.

See: Oval Rotation for the Outside Configurations

A Feather in the Outside cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended on the Outside cut of the Oval V-Groove.

If the Outside cut of the Oval V-Groove has a Feather, Increase the Outside Oval Rotation.

The Oval Rotation for V-Grooves controls for Bumps or Featherson an Oval V-Groove.

See: Outside Oval Rotation for V-Grooves Configurations

A Bump in the Outside cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended on the Outside cut of the Oval V-Groove.

If the Outside cut of the Oval V-Groove has a Bump, Decreasethe Outside Oval Rotation.

The Oval Rotation for V-Grooves controls for Bumps or Featherson an Oval V-Groove.

See: Outside Oval Rotation for V-Grooves Configurations

A Feather in the Inside cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended on the Inside Cut of the Oval V-Groove.

If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

The Oval Rotation for V-Grooves controls for Bumps or Featherson an Oval V-Groove.

See: Inside Oval Rotation for V-Grooves Configurations

A Bump in the Inside cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Inside Cut of the Oval V-Groove.

If the Inside cut of theOval V-Groove has a Bump, Increase the Inside Oval Rotation.

The Oval Rotation for V-Grooves controls for Bumps or Featherson an Oval V-Groove.

See: Inside Oval Rotation for V-Grooves Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.