Versions Compared

Old Version 33

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 34

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

  • Enter the desired Cut Speed Percentage for each Cartridge type.

    • 100% is cutting at Full Speed.

    • 50% is cutting at Half Speed.  

  • When that particular Cartridge is used next, it will use the new Cut Speed entered.

  • Slowing down the cut speed can help when cutting intricate designs to help prevent the Head from skipping on tight corners. 

Cut Speeds Button

  • Click the Cut Speeds button to open the Cut Speeds screen.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
Tip

  • Default Settings: See Admin > Cutting for the default settings for the Default Speed Percentage for Dense Material.

Image Removed

  • Use the Cut Speeds screen to select the Cutting Speed for each of the individual licensed Cartridges.

Expand
titleCartridge Definition

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

Image Removed
Image Removed

Cut Speed Percentage

Contents:

Child pages (Children Display)
alltrue
depth0
allChildrentrue
style
sortAndReverse
first0
Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
Cartridge for more information. Expand
titleCartridge Definition
A
is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.Image RemovedImage Removed

Speed Percentage Example

  • This example shows that the 90 Degree Cartridge will cut at 50% speed.

Image Removed

Dense Material

Info

  • This is a feature of the VPO Head; not all CMC models have this feature.  

  • Click Dense Material if this is dense material and Click OK.  

  • When you click Cut, the Head plunges at the Home position and applies the current Air Pressure.  

  • The user is prompted to adjust the Head Pressure to the High Setting. 

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information:

  • See Variable Pressure Optimization (VPO) for more information.

    • See Adjusting the Air Pressure for Typical Matboard

    •  for more information.

  • See Adjusting the Air Pressure for Dense Matboard for more information.

  • See Adjusting the Air Pressure for Extra Dense Matboard with the 90° Cartridge for more information.

    • Tip

    • Default Settings: See Admin > Cutting for the default settings for the Default Speed Percentage for Dense Material.

    Image Removed

    Extra Dense Material

    Info

    • This is a feature of the VPO Head; not all CMC models have this feature.  

  • Click Extra Dense Material if this is extra dense material and you are cutting it with the 90° Cartridge.  

    • Adjust the speed slidebar below the Extra Dense Materialcheckbox to the desired Cutting Speed Percentage and click OK.

    • For instance, 50% is 50% of the standard Cutting Speed.  

  • When you click Cut, the Head plunges at the Home position and applies the current Air Pressure.  

  • User is prompted to adjust the Head Pressure to the High Setting.

    • Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6
    Image Removed

    No Speed Reduction

    Info

    • This is a feature of the VPO Head; not all CMC models have this feature.  

    • Select No Automatic Speed Reduction for Depth of 16 and Above if you do not want the CMC to reduce speed when cutting thicker material.

    • Unselect No Automatic Speed Reduction for Depth of 16 and Above to let the CMC automatically reduce speed when cutting thicker material.

      • NOTE: Depending upon the thickness and density of the matboard, you may get better cuts by slowing down the cuts.

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6
    BladeSelectDenseNoAutomaticSpeedReductionZ1-70800.pngImage Removed
    Image Added