Add Pen Opening | ||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||
|
|
Click the object you want the Pen placed around.
Select the desired Pen Number.
There are nine Pens available.
|
|
Expand | ||
---|---|---|
| ||
The Install Pen Utility calibrates the Pen Tool for use on the CMC. The Pen Cartridge draws onto the surface of the matboard to create a design. In addition to templates, you can also Pen CutArts, LetterMats and TTFs. Use the Install Pen utility to calibrate the system for different Pens. See: Install Pen: Set the Pen Depth Setting for CMC Z1 See: Install Pen: Set the Pen Depth Setting for CMC Z (9000z) and 9000 |
The Pen Offset window will open.
Enter the Offset Distance from the selected opening to place the Pen.
Click OK.
Tip |
---|
|
The Pen is placed around the opening at the offset distance specified.
panelIconId | 1f9d9-200d-2642-fe0f |
---|---|
panelIcon | :man_mage: |
panelIconText | 🧙♂️ |
bgColor | #FFFAE6 |
|