Page Comparison

• The original Original LetterMat Height is displayed in the Min Height  fieldfield. 

• This is the size the LetterMat was originally drawn and tested.

• Cutting LetterMats smaller than the Minimum Size is not recommended, and may give unexpected results.

• LetterMats can be Debossed or Penned much smaller than they can be cut.

• Default Settings: See Admin > Editor for the default settings to Enforce Minimum Sizes for CutArt/LetterMat.

• See Also:

• LetterMat Dimensions Text Size

• LetterMat Dimensions Letter Size

• LetterMat Dimensions: Lock/Unlock the Size

• LetterMat Kerning

• LetterMat Tracking

• LetterMat Spacing Between Words

The Parameters are set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in Designer.

For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

In Designer, the Template Parameter Map displays a diagram describing each parameter field for the current Template.

Keep Aspect Ratio keeps the CutArt, Image, LetterMat, etc. Height and Width proportionate to avoid distortion in Designer.

See: CutArt Properties

See: Image Properties

See: LetterMat Properties

See: TTF Properties