Page Comparison

• Use the VG Width determines on the V-Groove Options section to determine if the V-Groove is a Closed V-Groove or Open V-Groove. 

• A Closed V-Groove has a VG Width of 0 (zero) and cuts from the front of the mat. 

• For Additional Information: See Width Adjustment for adjusting the V-Groove cutting width if cutting too narrow or too wide.

The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Closed V-Groove Configurations

See: 45 Degree Plus Closed V-Groove Configurations

See: 45 Front Closed V-Groove Configurations

See: 52 Degree Closed V-Groove Configurations