Versions Compared

Old Version 8

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 9

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

How to Mirror the #503: Leaf in Trace

Info

  • This will show you how to mirror the #503: Leaf by turning it into a CutArt.

  • It will also show you how to create a mirrored #503: Leaf using the #111: Quad template.

504LeafQuadDone800.png

  • Create your design using the current #503: Leaf.

  • Right-Click on the #503: Leaf and select Convert to CutArt

503MirrorConvertToCutArt800.png

  • The design will open up in Trace.

  • We are not making any edits to the design; just saving it under a different file format.

  • Click File > Save As.

503MirrorTraceSaveAs800.png

  • Make sure that the CutArt directory is selected.

  • Make sure that the CutArt filetype is selected.

  • Give it a filename and click Save.

503MirrorSaveCutArt800.png

  • Close Trace.

  • Start a new Designer design.

  • On the Openings Tab click Add CutArt.

  • In the Wizard/CutArt directory, locate your CutArt and click Design.

503MirrorAddCutArt800.png

  • With the CutArt selected, click on the Properties Tab.

  • Click Mirror the CutArt.

  • The CutArt is now mirrored.

503MirrorMirrored800.png

  • The mirrored #503: Leaf is now complete.

  • With the same CutArt opening, you could cut it mirrored or unmirrored.

504LeafQuadDoneFinished800.png

How to Create the Mirrored #503 Leaf with the #111 Quad Template

Info

  • The #503 Leaf can also be mirrored by creating it with the #111: Quad template.

503Orig800.pngImage Removed

  • Click New Mat Design on the FrameShop Main Page.

  • Click Cancel on the New Openings Screen.

  • On the Openings Tab, bring the template #111: Quad onto the Editor.

504LeafQuadStart800.pngImage Removed

  • Click on the Properties Tab.

    • Enter the desired size for the Quad openingand any other adjustments you wish to make.
    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6
    504LeafQuadSize800.pngImage Removed

    • On the Quad Tab, select template #104: Round Corner for Quadrants 2 and 4.

    504LeafQuadQuads800.pngImage Removed

    • Click on the Parameters Tab.

    • Change the Radius for Quadrants 2 and 4 to 1.5

    504LeafQuadRadius800.pngImage Removed

    • The mirror #504: Leaf design is now complete.

    504LeafQuadDone800.pngImage Removed

    • Now you have the option of using the #503: Leaf in any orientation by using the original #503: Leaf template and the edited #111: Quad template.

    504LeafQuadDoneFinished800.pngImage Removed