...
Current Bevel Type | |
|---|---|
Select the desired Cartridge Type Tab and then the bevel type you want to edit from the Current Bevel Type dropdown control before making adjustments. Select Front of Mat if it is being cut from the front of the mat. |  |
Degrees of Rotation for Non-Oval Openings | |
|---|---|
In Rotation, eight points equals one degree of rotation. Users usually make adjustments 4 points at a time. |  |
Increase the Rotation to turn the foot block clockwise to correct for a Swoop. Decrease the Rotation to turn the foot block counterclockwise. to correct for a Flare. |  |
Opening Swoop | |
|---|---|
The beginning of the cut swoops toward the non-oval opening. |  |
Increase the Rotation. |  |
...
Twisted Corner | |
|---|---|
A Twisted Corner is when the blade turns before retracting from the matboard, which tears the matboard and twists the corner which is seen especially on the back of the mat. Check to make sure the Rotation hasn't been set to a high number. Optionally, see the Clean the Foot Block procedure for information on cleaning the foot block. Twisted corners can also be a symptom of oil/water in the Air Valve, or an issue with the Head. Check the Air Regulator for excess water. |  |
Degrees of Rotation | |
In Rotation, eight points equals one degree of rotation. Users usually make adjustments 4 points at a time. | |
Increase the rotation to turn the foot block clockwise. Decrease the rotation to turn the foot block counterclockwise. | |