Page Comparison

• The Mat Defaults section sets the defaults for the New Openings Screen and the Design Editor (described below).

• For Additional Information:

• See the New Openings Screen.

• See the Design Editor.

• Select the default position for the Opening Size Field position on the New Openings Screen.

• For Additional Information: See the New Openings Screen.

• Select the default Layer Direction for Designing and Cutting.

• For Additional Information:

• See the New Openings Screen.

• See the Design Editor.

• See the Nesting Editor.

• See the Trace Editor.

• See the Visualize Editor.

• See the Cut Preview Screen.

• Select the default Border Fields order for the New Openings Screen.

• For Additional Information: See the New Openings Screen.

The Border is the area of precisely definable width between the outside edge of a Mat and the edge of the Opening(s) in Designer, Nesting, and Visualization.

See: Border Properties

See: Border Default Settings

• Set the default Reveal Valuesfor each template layer.

• For Additional Information: See the Template Propertiesin Design.

In a two-layer design, the Reveal is the amount of the bottom matboard showing under the top mat in Designer and Visualize.

The standard Reveal between the top and bottom mat is 1/4".

See: Designer Reveal Function

• Set the default sizes available for the Openings, Outside and Sheet from the Sizes button drop-down control.

• For Additional Information:

• See the New Openings Screen.

• See the Design Editor.

• See the Nesting Editor.

• See the Visualization Editor.

• See the Cut Preview Screen.

The Sizes Button displays the Recent and Standard sizes. 

Recent lists the last ten sizes entered.

Standard lists Standard sizes associated with the current unit of measurement.

• Select whether or not to prompt for the image scale when an image file is loaded in Visualization.

• For Additional Information:

• See Load File Image in Visualization.

• See Load File Image in Trace.

• See Vectorize Image in Designer.

• See Load File Image on the Main Screen.

The Visualize software allows the user to create a digitally finished product using the selected frames, matboards and the artwork.

This makes it easy to present several different variations of the design for the customer to pick from. 

See: Visualization

• Select whether to limit the size of image files loaded into Visualization.

• Note: Large images will slow the software down.

• For Additional Information:

• See Load File Image in Visualization.

• See Load File Image in Trace.

• See Vectorize Image in Designer.

• See Load File Image on the Main Screen.