changes.mady.by.user dani.simmonds
Saved on May 30, 2024
Saved on Jun 12, 2024
The Rotation controls for Swoops and Flares in Objects.
A Swoop in an object is where the corners Curve Inward toward the object.
If the Object has a Swoop, Increase the Rotation.
The Rotation controls for Swoops and Flares in Openings.
See: Swoop Rotation in Configurations
See: Swoop Rotation for Openings in Configurations
See: Swoop Rotation for Drops in Configurations
See: Swoop Rotation for Outside in Configurations
See: Swoop on Outside Rotation on V-Grooves Configurations
See: Swoop on Inside Rotation on V-Grooves Configurations
See: Swoop Rotation for Crease Configurations
A Flare in an object is where the corners Curve Away from the object.
If the Object has a Flare, Decrease the Rotation.
See: Flare Rotation in Configurations
See: Flare Rotation for Openings in Configurations
See: Flare Rotation for Drops in Configurations
See: Flare Rotation on Outside in Configurations
See: Flare on Outside Rotation on V-Grooves Configurations
See: Flare on Inside Rotation on V-Grooves Configurations
See: Flare Rotation on Crease Configurations
A Swoop in an Opening is where the corners Curve Inward toward the opening.
If the Opening has a Swoop, Increase the Rotation.
A Flare in an Opening is where the corners Curve Away from the opening.
If the Opening has a Flare, Decrease the Rotation.
A Swoop in a Drop is where the corners Curve Inward toward the drop.
If the Drop has a Swoop, Increase the Rotation.
A Flare in a Drop is where the corners Curve Away from the drop.
If the Drop has a Flare, Decrease the Rotation.
A Swoop in the Outside is where the corners Curve Inward toward the outside.
If the Outside has a Swoop, Increase the Rotation.
The Rotation controls for Swoops and Flares in Outsides.
A Flare in a the Outside is where the corners Curve Away from the outside.
If the Outside has a Flare, Decrease the Rotation.
The Outside Rotation controls for Swoops and Flares in the Outside Cut of the V-Grooves.
The Inside Rotation controls for Swoops and Flares on the Inside Cut of the V-Grooves.
A Swoop in the Outside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.
If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.
The Rotation on V-Grooves controls for Swoops and Flareson V-Grooves.
A Flare on the Outside cut of the V-Groove is where the corners Curve Away from the V-Groove.
If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.
A Swoop on the Inside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.
If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.
The Inside Rotation on V-Grooves controls for Swoops and Flareson V-Grooves.
A Flare on the Inside cut of the V-Groove is where the corners Curve Away from the V-Groove.
If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.
A Swoop in a Crease is where the corners Curve Inward toward the crease.
If the Crease has a Swoop, Increase the Rotation.
A Flare in a Crease is where the corners Curve Away from the crease.
If the Crease has a Flare, Decrease the Rotation.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
