Versions Compared

Old Version 11

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

90° Bevel Drop Definition

90° Bevel Drop Full Definition
Panel
panelIconIdatlassian-plus1f9d9-200d-2640-fe0f
panelIcon:pluswoman_mage:
panelIconText:plus:🧙‍♀️
bgColor#FFFAE6
title

  • The 90° Bevel Drop is created by cutting a 90° Right Angle into the matboard.

  • The matboard core is hidden from view since there is no Bevel when cutting at a 90° Right Angle.

  • The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    The

    • The

    Bevel Type for the 90° openings is the form of opening cut and determines the initial blade plunge position.

    • Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove.

    • However, it cannot be chosen as a standalone bevel type within

    Designer.
Expand

    • the Design Editor.

  • Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

90PlasticBevelDrop70800.pngImage Added
Expand
titleHow to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

...

Excerpt
hiddentrue
name90 Degree Bevel Drop

  • The 90° Bevel Drop is created by cutting a 90° Right Angle into the matboard.

  • The matboard core is hidden from view since there is no Bevel when cutting at a 90° Right Angle.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type for the 90° openings is the form of opening cut and determines the initial blade plunge position.

The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

...

See: 90 Degree Bevel Drop Configurations

90PlasticBevelDrop70800.pngImage Added

Full Definition: 90 Degree Bevel Drop Definition