Rotation on Non-Oval V-Groove | |
|---|---|
Adjust the Rotation if you are getting swoops or flares in the corners where the blade plunges in and where it retracts from the matboard on a non-oval V-Groove which is controlled by RotationGroove. |  |
Select the Portion of the Non-Oval V-Groove you wish to Edit: | |
|---|---|
V-Groove Outside Rotation The Outside Rotation field controls how much the foot block will rotate before cutting. The outside cuts of the V-Groove are exterior cuts, and cut into the matboard and not the fallout. They cut on the second pass of the V-Groove, and are cut in a counterclockwise direction. See V-Groove Outside Rotation for information on how to adjust for this. |  |
V-Groove Inside Rotation The Inside Rotation field controls how much the foot block will rotate before cutting. The inside cuts of the V-Groove are interior cuts, and cut into the fallout and not the matboard. They cut on the first pass of the V-Groove, and are cut in a clockwise direction. See V-Groove Inside Rotation for information on how to adjust for this. |  |