The 45° Cartridge cuts the matboard surface with the blade angled at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.  See: 45 Degree Normal Bevel Opening Definition See: /wiki/spaces/FrameShop8x/pages/1948975198 See: 45 Degree Normal Bevel Drop Definition See: 45 Degree Reverse Bevel Drop Definition See: 45 Degree Outside Definition See: 45 Degree Normal Bevel Closed V-Groove Definition See: 45 Degree Normal Bevel Open V-Groove Definition See: 45 Degree Reverse Bevel Open V-Groove Definition |