The 90° Cartridge cuts a 90° Right Angle into the matboard. The matboard core is not visible from the front. The initial plunge position is determined by the bevel typehidden from view since there is no Bevel Type cut at a 90° Right Angle. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.  See: 90 Degree Bevel Opening Definition See: 90 Degree Bevel Drop Definition See: 90 Degree Outside Definition See: 90 Degree Bevel Open V-Groove Definition |