Versions Compared

Old Version 6

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 7

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

52° Outside Definition

Panel
panelIconIdatlassian-plus
panelIcon:plus:
panelIconText:plus:
bgColor#FFFAE6

  • The 52° Outside is created by cutting into the fallout surface with the blade angled at 52°, thereby slanting the bevel under the fallout surface.

  • The matboard core is not visible from the front.

  • The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

  • The Bevel Type determines the initial blade plunge position

is determined by the bevel type

  • .

Expand
title52° Outside Full Definition

The 52° Outside is created by cutting into the fallout surface with the blade angled at 52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front. The initial plunge position is determined by the bevel type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 52 Degree Outside Configurations

Expand
titleHow to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.