changes.mady.by.user dani.simmonds
Saved on May 14, 2024
Saved on May 29, 2024
The Depth Bias is used in conjunction with the Default Blade Depth for 4-ply. The formula is:
For example, if the normal blade depth for 4-ply is 11, then 11-10=1, so enter 1 for the Depth Bias.
Select the desired Blade Cartridge Type Tab.
Determine what the normal blade depth is for this cartridge.
Subtract 10 from your Default Blade Depth.
This may be a negative number.
Enter the number into the Depth Bias field for this cartridge.
If the Blade Depth is cut Too Deep, Decrease the Depth Bias.
If the Blade Depth is cut Too Shallow, Increase the Depth Bias.
For Additional Information:
See the Blade Depth Field for more information on the Blade Depth Entry Field.
See the Blade Depth Button for more information on setting the software Blade Depth.
See the Blade Depth Quick Select for more information on the Blade Depth Quick Select dropdown control.
See Matboard Properties for information on assigning matboard SKUs to each layer of the design in Designer.
See Mat SKUs for information on assigning matboard SKUs to each layer of the design in Visualize.
See Frame SKUs for information on assigning Frame SKUs to each layer of the design in Visualize.
See Assign SKU to Layer for more information on Assigning a SKU to a Layer on the Cut Preview.
Default Settings:
See Admin > Subscription for the default settings for Subscribing to Vendors.
See Admin > Frames for the default settings for Frame Records for Vendors you are Subscribed to.
See Admin > Mats for the default settings for Mat Records for Vendors you are Subscribed to.
The Depth Bias is used to calculate the properBlade Depth when the SKUselected for the matboard contains the Matboard Thickness.
The formula is: [(Default Depth) - 10]
For example, if the normal Blade Depth for 4-ply is 11, then 11-10=1, so enter 1 for the Depth Bias.
