changes.mady.by.user dani.simmonds
Saved on May 28, 2024
A Flare in an Opening is where the corners Curve Away from the Opening.
If the Opening has a Flare, Decrease the Rotation.
A Flare is where the corners Curve Away from the object.
If the object has a Flare, Decrease the Rotation.
See: Rotation Configurations
A Flare in a Drop is where the corners Curve Away from the Drop.
If the Drop has a Flare, Decrease the Rotation.
A Flare in the Outside is where the corners Curve Away from the Outside.
If the Outside has a Flare, Decrease the Rotation.
A Flare on the Outside cut of the V-Groove is where the corners Curve Away from the V-Groove.
If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.
See: Outside Rotation Configurations
A Flare on the Inside cut of the V-Groove is where the corners Curve Away from the V-Groove.
If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.
See: Inside Rotation Configurations
A Flare in a Crease is where the corners Curve Away from the Crease.
If the Crease has a Flare, Decrease the Rotation.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
For Flares on a Non-Oval V-Groove, see Flare on a Non-Oval V-Groove Definition.
