Versions Compared

Old Version 3

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 4

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Archival Reinforced Shell Box

Info

  • This box consists of a base and a separate lid.

  • The base and lid can be cut separately.

  • Note: If cutting thicker material, make sure that the thickness field accurately reflects the thickness of the material.

ArchReinShellBoxAngled800.pngImage RemovedArchReinShellBoxAngled800.pngImage Added

  • Cut out the lid and base of the box at the desired dimension.

ArchReinShellBaseLidCut800.pngImage RemovedArchReinShellBaseLidCut800.pngImage Added

  • Fold the lid section along the creasing edges.

ArchReinShellBaseLidFolded800.pngImage RemovedArchReinShellBaseLidFolded800.pngImage Added

  • Fold the reinforcement tabs backwards along the creasing edges.

ArchReinShellReinFoldedBackwards800.pngImage RemovedArchReinShellReinFoldedBackwards800.pngImage Added

  • Fold in the inner tabs toward the center of the box.

ArchReinShellTabIn800.pngImage RemovedArchReinShellTabIn800.pngImage Added

  • Fold the end of the box over the inner tabs.

ArchReinShellFoldEndOverTabReinFoldedBack800.pngImage RemovedArchReinShellFoldEndOverTabReinFoldedBack800.pngImage Added

  • As you fold the end of the box over, let the reinforcement tabs line up to the inside of the box sides.

ArchReinShellFoldEndOverTabReinInside800.pngImage RemovedArchReinShellFoldEndOverTabReinInside800.pngImage Added

  • The reinforcement tabs will line up to the inside of the box sides.

ArchReinShellTuckDownReinInside800.pngImage RemovedArchReinShellTuckDownReinInside800.pngImage Added

  • Repeat these steps to the other end of the box

ArchReinShellFoldedEnds800.pngImage RemovedArchReinShellFoldedEnds800.pngImage Added

  • Rotate the box if desired.

  • Fold the side of the box over the reinforcement tabs that are lined up to the inside of the box.

ArchReinShellFoldEndOverReins800.pngImage RemovedArchReinShellFoldEndOverReins800.pngImage Added

  • Tuck the tabs of the box sides into the slots in the bottom of the box, securing it in place. 

ArchReinShellFoldEndOverReinsFolding800.pngImage RemovedArchReinShellFoldEndOverReinsFolding800.pngImage Added

  • The tabs will be inserted into the slots at the bottom of box.

ArchReinShellFoldEndOverReinsFolded800.pngImage RemovedArchReinShellFoldEndOverReinsFolded800.pngImage Added

  • Repeat the steps on the other side of the box.

  • Repeat the steps on the top of the box.

ArchReinShellLidDone800.pngImage RemovedArchReinShellLidDone800.pngImage Added

  • Place the lid on top of the base.

  • The Archival Reinforced Shell Box is assembled.

ArchReinShellBoxAngled800.pngImage RemovedArchReinShellBoxAngled800.pngImage Added