Versions Compared

Old Version 62

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 63

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Backup on Creases

  • If the Backup is Too Long, Decrease the Backup.

  • If the Backup is Too Short, Increase the Backup.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
Expand
titleHow to Select the Bevel Type to Edit

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Expand
titleHow to Adjust the Exterior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image RemovedImage AddedImage Added

Crease Backup Too Long

  • If the Backup is Too Long, Decrease the Backup.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
Expand
titleBackup on Crease Definition

  • The Backup controls where the Crease cartridge Plunges into the Matboard. 

    • If the Backup is Too Long, Decrease the Backup.

    • If the Backup is Too Short, Increasethe Backup.

  • The Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration.

See: Backup on Creases in Configurations

Expand
titleHow to Adjust the Exterior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

...