Page Comparison

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

• The 45 Degree Cartridge cuts a 45° bevel into the matboard.

The 45° Cartridge cuts the matboard surface with the blade angled at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The initial plunge position is determined by the bevel type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Normal Bevel Opening Definition

See: /wiki/spaces/FrameShop8x/pages/1948975198

See: 45 Degree Normal Bevel Drop Definition

See: 45 Degree Reverse Bevel Drop Definition

See: 45 Degree Outside Definition

See: 45 Degree Normal Bevel Closed V-Groove Definition

See: 45 Degree Normal Bevel Open V-Groove Definition

See: 45 Degree Reverse Bevel Open V-Groove Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The 45°+ Cartridge (45° Plus Cartridge) cuts a 45° bevel into thicker matboard such as 8-ply.

The 45° Plus Cartridge cuts the matboard surface with the blade angled at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The initial plunge position is determined by the bevel type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Plus Normal Bevel Opening Definition

See: 45 Degree Plus Reverse Bevel Opening Definition

See: 45 Degree Plus Normal Bevel Drop Definition

See: 45 Degree Plus Reverse Bevel Drop Definition

See: 45 Degree Plus Outside Definition

See: 45 Degree Plus Normal Bevel Closed V-Groove Definition

See: 45 Degree Plus Normal Bevel Open V-Groove Definition

See: 45 Degree Plus Reverse Bevel Open V-Groove Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The 45° Front Cartridge cuts a 45° bevel into the matboard from the front of the mat.

The 45° Front Cartridge cuts the front of the matboard surface with the blade angled at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The initial plunge position is determined by the bevel type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Front Normal Bevel Opening Definition

See: 45 Degree Front Reverse Bevel Opening Definition

See: 45 Degree Front Normal Bevel Drop Definition

See: 45 Degree Front Reverse Bevel Drop Definition

See: 45 Degree Front Outside Definition

See: 45 Degree Front Normal Bevel Closed V-Groove Definition

See: 45 Degree Front Normal Bevel Open V-Groove Definition

See: 45 Degree Front Reverse Bevel Open V-Groove Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The 52 Degree Cartridge cuts a 52° bevel into the matboard.

The 52° Cartridge cuts the matboard surface with the blade angled at 52°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The initial plunge position is determined by the bevel type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 52 Degree Normal Bevel Opening Definition

See: 52 Degree Reverse Bevel Opening Definition

See: 52 Degree Normal Bevel Drop Definition

See: 52 Degree Reverse Bevel Drop Definition

See: 52 Degree Outside Definition

See: 52 Degree Normal Bevel Closed V-Groove Definition

See: /wiki/spaces/FrameShop8x/pages/1948844274

See: 52 Degree Reverse Bevel Open V-Groove Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The 90 Degree Cartridge cuts a 90° opening into the matboard, displaying no bevel.

The 90° Cartridge cuts a 90° Right Angle into the matboard. The matboard core is not visible from the front. The initial plunge position is determined by the bevel type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 90 Degree Bevel Opening Definition

See: 90 Degree Bevel Drop Definition

See: 90 Degree Outside Definition

See: 90 Degree Bevel Open V-Groove Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The Deboss Cartridges press into the matboard to create a subtle design.  

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

See: Add Deboss Opening Function

See: Deboss Configurations

See: Deboss Thin Definition

See: Deboss Medium Definition

See: Deboss Wide Definition

• The Pen Cartridge holds a pen to the matboard to draw onto the matboard. 

The Pen Cartridge is used to draw onto the surface of the matboard on the CMC to create a design.

You can Pen Designs, CutArts, LetterMats and TTFs.

See: Pen Cartridge Configurations

• The Vinyl Cartridge cuts designs into a sheet of Vinyl which has been temporarily adhered to the matboard. 

The Vinyl Cartridge uses a special blade to cut the Vinyl which has been temporarily adhered to matboard to create the design.

See: Vinyl Cartridge Configurations

• The Crease Cartridge perforates the material to make folding it easier when making Boxes. 

The Crease Cartridgeis used to apply Crease marks that are used to assist in folding the thicker finished Box.

See: Add Crease Opening Function

See: Crease Cartridge Configurations