Page Comparison

Cut the Full Outside Edge

Select Full from the Outside Cut Options dropdown control to cut the complete outside edge of the design on the CMC Z1, Z(9000z), 9000 and 8000+.
When Tiling mats, it will cut out the complete outside edge of each design.
If you have Remnant Trimming on, it will also cut off the scrap edge.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information:
See Matboard Properties in the Design to turn on/off the Outside cut.
Select Options Menu > Cut Outside on the Cut Previewto cut the outside of the mat.
See /wiki/spaces/FrameShop8x/pages/1942506497 Cut the Outside on the Cut Previewto turn on/off the Outside cut.
See Enable Outside Cutunder Advanced Outside Options: Enable Outside on the Cut Previewto turn toggle on/off the Outside cut.See Remnant Trimming for additional information on Trimming the Matboard Remnant.

Tip
Default Settings: See Admin > Editor for the default settings for Cutting the Outside. See Admin > Cutting for the default settings for the Advanced Options. See Admin > Cutting for the default settings for the Cut Mode. See Admin > Cutting for the default settings for 90 Degree Outside. See Admin > Cutting for the default settings for Remnant Trimming.

Expand

title	Remnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

See: Remnant Trimming Function

Versions Compared

Old Version 22

New Version 23

Key

Cut the Full Outside Edge