Page Comparison

• Use the Guides toggle to determine whether object edges and center points will snap to the Guide lines.

• For Additional Information:

• See the New Guide button in the Alignment tab in Design for the different directional Guides that can be placed.

• Right-Click on the Guide and select Edit Guide.

• Right-Click on the Guide and select Remove Guide(s) or Inactivate Guides.

• Default Settings: See Admin > Editor for the default setting for the Guides

A Guide is a Red line marker which can direct the motion or positioning of objects.

The sides and centers of Objectscan snap to the Guide Lines.

Click on the Ruler around the design and drag toward the center to place a Guide.

Select the Guide and click Properties to edit the position or drag it where desired.

• Note: To place a Guide a specified distance to the Inside of an object, select New Guide From Other and select the desired direction and placement using negative numbers.

• For Additional Information:

• See the New Vertical Guide and New Horizontal Guide in the Right-Click Menu.See New Guide on the Alignment TabGuide button in the Alignment tab in Design for the different directional Guides that can be placed.

• See Guides Toggleto toggle the Guides On or Off.

• Right-Click on the Guide and select Edit Guide.

• Right-Click on the Guide and select Remove Guide(s) or Inactivate Guides.

A Guide is a Red line marker which can direct the motion or positioning of objects.

The sides and centers of Objectscan snap to the Guide Lines.

Click on the Ruler around the design and drag toward the center to place a Guide.

Select the Guide and click Properties to edit the position or drag it where desired.

• For Additional Information:

• See the New Vertical Guide and New Horizontal Guide in the Right-Click Menu.See New Guide on the Alignment TabGuide button in the Alignment tab in Design for the different directional Guides that can be placed.

• See Guides Toggleto toggle the Guides On or Off.

• Right-Click on the Guide and select Edit Guide.

• Right-Click on the Guide and select Remove Guide(s) or Inactivate Guides.

A Guide is a Red line marker which can direct the motion or positioning of objects.

The sides and centers of Objectscan snap to the Guide Lines.

Click on the Ruler around the design and drag toward the center to place a Guide.

Select the Guide and click Properties to edit the position or drag it where desired.

• The Positioning Toggle determines whether the Guide is placed on the Top or Bottom layer of the opening.

  • Several Guides can be placed at the same time with this screen.

  • Negative Numbers can be entered to place a Guide within the opening.

• Auto Alignment can be toggled on the Edit Menu.

• This can also be used to assist with aligning openings in additional addition to Guides.

The Auto Alignmentfunction displays bluealignment lines as you move an object and it lines up to another object in Designer,Trace and Nesting, making aligning openings easier.

This can be toggled on/off in the Options menu for Designer and Trace.

See: Options Menu in Designer

See: Options Menu in Trace