Page Comparison

• Use CutArt Properties to edit the individual proprietary adjustments available for the CutArt.

• For Additional Information: Right-Click on the object and select Properties.

• Default Settings: See Admin > Editor for the default settings to Enforce Minimum Sizes for CutArt/LetterMat.

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

See: Add CutArt Function

• Default Settings: See Admin > Editor for the default settings to Enforce Minimum Sizes for CutArt/LetterMat.

The Sizes Button displays the Recent and Standard sizes. 

Recent lists the last ten sizes entered.

Standard lists Standard sizes associated with the current unit of measurement.

The Swap Button switches the values between the width and height fields.

• The Original CutArt Width is displayed in the Min Width field.  

• The Original CutArt Height is displayed in the Min Height field.

• Cutting CutArts smaller than the Minimum Size is not recommended, and may give unexpected results.

• CutArts can be Debossed or Penned much smaller than they can be cut.

• Default Settings: See Admin > Editor for the default settings to Enforce Minimum Sizes for CutArt/LetterMat.

Min Height displays the Minimum Height that the selected CutArt or LetterMat has been tested to cut.

The CutArt/LetterMat can be Debossed or Penned at a much smaller size than it can be cut.

See: CutArt Properties

See: LetterMat Properties