Page Comparison

• The Vectorize button will convert the Rastor Imageinto Vector Lines, Arcs and Curves with the currently selected settings.

• If the image is large or extremely complex, it may take a while for the vectorization process to complete.

A Rasteris a Bitmap image (JPEG, PNG, GIF, etc.) that is made up of a grid of Pixels, such as a photograph, which can be loaded in Trace, Designer and Visualize.

See: Vector Definition

See: Raster to Vector Definition

See: Vectorize in Designer Function

See: Vectorize in Trace Function

A Vector is a graphic drawing in Trace that contains Paths, which are defined by a Start and End point and may contain other Points, Curves, and Angles.

The Vector Paths are independent of resolution, which means they can be resized without losing detail.

A Path is also a file format of Trace which saves all of the Vector elements of the design as you work, whether it is Traced or not. 

When the design is completed, save it as a CutArt to load into Designer.

See: Raster Definition

See: Vector Definition

See: Raster to Vector Definition

See: Vectorize in Designer Function

See: Vectorize in Trace Function

Raster to Vector is the process of taking a Raster image and converting it into a Vector to edit in Designer and Trace.

A Raster is a Bitmap image (JPEG, PNG, GIF, etc.) that is made up of a grid of Pixels, such as a photograph.

A Vector is a drawn graphic path which is defined by a Start and End point, which may contain other Points, Curves, and Angles, drawn in Trace.

See: Raster Definition

See: Vector Definition

See: Vectorize in Designer Function

See: Vectorize in Trace Function

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc.

See: Line Tool Function

The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

The Arc has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

See: Arc Tool in Trace

See: Arc Tool Definition 

See: Splines Definition

See: Convert Arc to Splines Function

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor), Two Separate Middle Points (called Handles) which can be moved to alter the shape, and the Terminating Position (called an Anchor)

The Convert Arc to Splines process will convert any Arcs to Splines/Curves which are easier to tangify to make cuts smoother.

See: Arc Definition

See: Arcs Tool Function

See: Splines Definition

See: Splines Tool Function

See: Convert Arc to Splines Function