Page Comparison

Set Unidirectional from the Cut Pattern dropdown control to cut Tiled mats in One Direction only on the CMC Z1, Z(9000z), 9000 and 8000+.

Click the Set Advanced Options button to access the Advanced Outside Options.

For Additional Information:

Select Options Menu > Cut Outside to cut the outside of the mat.

See /wiki/spaces/FrameShop8x/pages/1942506497 to turn on/off the Outside cut.

See Advanced Outside Options: Enable Outside Cut to turn on/off the Outside cut.

Default Settings:

See Admin > Editor for the default settings for Cutting the Outside.

See Admin > Cutting for the default settings for the Advanced Options.

See Admin > Cutting for the default settings for the Cut Mode.

See Admin > Cutting for the default settings for 90 Degree Outside.

See Admin > Cutting for the default settings for Tiling.

See Admin > Cutting for the default size for the Spacing between designs.

This will cut the Outside of Tiled mats in One Direction only.

This is useful if you want the Outside cuts of the Tiled mats to be exactly the same size, as the sizes may be off by the thickness of the blade when it's cutting Bi-Directional (two different directions) when cutting the Outside.

Default Settings: See Admin > Cutting for the default settings for Tiling.