Page Comparison

90° Blade Cartridge Outside Cuts

Panel

For Additional Information: See Set Advanced Options for additional outside cut options.

Toggle the Cut Outside Using 90 Degree Tool to On from the Advanced Outside Options screen.
Click OK.

Select the desired Outside Cut Option from the Advanced Outside Options for cutting the outside of the mat and click OK.
Select Off to not cut the outside of the mat.

Panel

Tip
Default Settings: See Admin > Editor for the default settings for Cutting the Outside. See Admin > Cutting for the default settings for the Advanced Options. See Admin > Cutting for the default settings for the Cut Mode. See Admin > Cutting for the default settings for 90 Degree Outside.

Optionally, select the desired Outside Cut Option for cutting the outside of the mat from the Cut Preview.
Select Off to not cut the outside of the mat.

Panel

For Additional Information:
See Properties for selecting to Cut the Outside.
Select Options Menu > Cut Outside to cut the outside of the mat.
See /wiki/spaces/FrameShop8x/pages/1942506497 to turn on/off the Outside cut.
See Enable Outside Cutunder Advanced Outside Options: Enable Outside Cut to turn toggle on/off the Outside cut.
See Cut Outside Using 90 Degree Tool under Set Advanced Options.

Tip
Default Settings: See Admin > Editor for the default settings for Cutting the Outside. See Admin > Cutting for the default settings for the Advanced Options. See Admin > Cutting for the default settings for the Cut Mode. See Admin > Cutting for the default settings for 90 Degree Outside.