changes.mady.by.user dani.simmonds
Saved on Apr 18, 2024
Saved on Apr 25, 2024
If the Non-Blade Tool is too Deep, Decrease the Depth Setting.
If the Non-Blade Tool is too Shallow, Increase the Depth Setting.
Select desired Cartridge Tab.
Select the desired Bevel Type from Current Bevel Type.
Edit the desired Configuration field.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
The Depth Setting controls the Blade Depth for theNon-Blade Tools in the Configurations.