Page Comparison

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

• The 45 Degree Cartridge cuts a 45° bevel into the matboard.

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The 45°+ Cartridge (45° Plus Cartridge) cuts a 45° bevel into thicker matboard such as 8-ply.

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The 45° Front Cartridge cuts a 45° bevel into the matboard from the front of the mat.

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The 52 Degree Cartridge cuts a 52° bevel into the matboard.

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The 90 Degree Cartridge cuts a 90° opening into the matboard, displaying no bevel.

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The Deboss Cartridges press into the matboard to create a subtle design.  

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

See: Add Deboss Opening Function

See: Deboss Configurations

See: Deboss Thin Definition

See: Deboss Medium Definition

See: Deboss Wide Definition

• The Pen Cartridge holds a pen to the matboard to draw onto the matboard. 

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

The Pen Cartridge is used to draw onto the surface of the matboard on the CMC to create a design.

You can Pen Designs, CutArts, LetterMats and TTFs.

See: Pen Cartridge Configurations

• The Vinyl Cartridge cuts designs into a sheet of Vinyl which has been temporarily adhered to the matboard. 

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

The Vinyl Cartridge uses a special blade to cut the Vinyl which has been temporarily adhered to matboard to create the design.

See: Vinyl Cartridge Configurations

• The Crease Cartridge perforates the material to make folding it easier when making Boxes. 

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

The Crease Cartridgeis used to apply Crease marks that are used to assist in folding the thicker finished Box.

See: Add Crease Opening Function

See: Crease Cartridge Configurations

• For Additional Information: See Bevel Type Examples for examples of the different bevel types that the bladed cartridges can cut. 

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.