Page Comparison

...

Alignment Lines

Click and drag openings to the desired position.
You will see blue alignment lines display when an opening is aligned with a current opening's edges which makes dragging and dropping a quick and easy way to place openings.

Panel

Using the Alignment Buttons
Use the Alignment buttons to arrange the position of objects in relation to the bounding rectangle of the selected objects.

InfoThese work just like the Alignment Buttons in FrameShop Designer editor

Panel

Image Modified

Align to Left Edge
Select two or more openings. Click Align to Left Edge button. The selected openings will align to the left-most edge of the selection.	Image Modified
This is similar to the Align to Left Edge in Design.	Image Modified

Align to Right Edge
Select two or more openings. Click Align to Right Edge button. The selected openings will align to the right-most edge of the selection.	Image Modified
This is similar to the Align to Right Edge in Design.	Image Modified

Align to Bottom Edge
Select two or more openings. Click Align to Bottom Edge button. The selected openings will align to the bottom-most edge of the selection.	Image Modified
This is similar to the Align to Bottom Edge in Design.	Image Modified

Align to Top Edge
Select two or more openings. Click Align to Top Edge button. The selected openings will align to the top-most edge of the selection.	Image Modified
This is similar to the Align to Top Edge in Design.	Image Modified