Page Comparison

• First Cut: Cuts the Interior cut into the Fallout Clockwise.

• Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

A Swoop in the Outside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.

If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

The Rotation on V-Grooves controls for Swoops and Flareson V-Grooves.

Image ModifiedImage Modified

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

A Flare on the Outside cut of the V-Groove is where the corners Curve Away from the V-Groove.

If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.

The Rotation on V-Grooves controls for Swoops and Flareson V-Grooves.

Image ModifiedImage Modified

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

The Outside Rotation on V-Grooves controls for Swoops and Flares in the Outside Cut of the V-Grooves.