Versions Compared

Old Version 36

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 37

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Circle/Oval Rotation Utility

Info

  • This utility is a more detailed calibration feature than adjusting the Oval Rotation field alone because it allows for adjustments for a variety of different sized ovals.

Expand
titleFeather Oval Rotation General Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended on the Oval.

If the Oval Opening has a Feather, Decrease the Oval Rotation.

The Oval Rotation controls for Bumps or Feathers on an Oval.

Image ModifiedImage Modified

See: Oval Rotation Configurations

See: Oval Rotation for Openings Configurations

See: Oval Rotation for Drops Configurations

See: Oval Rotation for the Outside Configurations

See: Outside Oval Rotation for V-Grooves Configurations

See: Inside Oval Rotation for V-Grooves Configurations

Expand
titleBumps Oval Rotation General Definition

A Bump in an Oval Openingis a Lumpof material left behind where the cut started and ended.

If the Oval Opening has a Bump, IncreasetheOval Rotation.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

Image ModifiedImage Modified

See: Oval Rotation Configurations

See: Oval Rotation for Openings Configurations

See: Oval Rotation for Drops Configurations

See: Oval Rotation for the Outside Configurations

See: Outside Oval Rotation for V-Grooves Configurations

See: Inside Oval Rotation for V-Grooves Configurations

InfoThis utility is a more detailed calibration feature than adjusting the Oval Rotation field alone because it allows for adjustments for a variety of different sized ovals.

Image Modified

Circle/Oval Rotation Screen

Testing the Circle Cuts

  • Select the Bevel Type Cutting Direction for the bevel type you are editing from the upper left dropdown control.

  • See Bevel Type Cutting Direction for information on the cutting direction for the different bevel types.

Image Modified
Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#B3F5FF

  • Put in an 11x12" mat into the CMC and click Cut.

  • Align the Head if necessary.

  • After it cuts, check the cuts and determine if you are getting a Bump or a Feather for any of the oval sizes that were cut.

Image Modified

Bump

PanelpanelIconIdatlassian-notepanelIcon:note:bgColor#B3F5FF
If the Oval Opening has a , IncreasetheOval Rotation.

Bump

Info

  • This is like adjusting the Oval Rotation field on the Configurations screen,but is specific to this particular oval size.

Expand
titleBumps Oval Rotation General Definition

A Bump in an Oval Openingis a Lumpof material left behind where the cut started and ended.

If the Oval Opening has a Bump, IncreasetheOval Rotation.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

See: Oval Rotation Configurations

See: Oval Rotation for Openings Configurations

See: Oval Rotation for Drops Configurations

See: Oval Rotation for the Outside Configurations

See: Outside Oval Rotation for V-Grooves Configurations

See: Inside Oval Rotation for V-Grooves Configurations

Feather

PanelpanelIconIdatlassian-notepanelIcon:note:bgColor
#B3F5FFIf the Oval Opening has a

Feather

, Decrease the Oval Rotation.

Info

  • This is like adjusting the Oval Rotation field on the Configurations screen,but is specific to this particular oval size.

Expand
titleFeather Oval Rotation General Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended on the Oval.

If the Oval Opening has a Feather, Decrease the Oval Rotation.

The Oval Rotation controls for Bumps or Feathers on an Oval.

Image ModifiedImage Modified

See: Oval Rotation Configurations

See: Oval Rotation for Openings Configurations

See: Oval Rotation for Drops Configurations

See: Oval Rotation for the Outside Configurations

See: Outside Oval Rotation for V-Grooves Configurations

See: Inside Oval Rotation for V-Grooves Configurations

Image ModifiedImage Modified

Adjusting Configurations and Doing Test Cuts

  • Adjust the Rotation values accordingly until satisfied.

  • After a particular size has been satisfactorily adjusted, click the Locked checkbox for that size to no longer cut nor adjust it.

Image Modified

Positioning Controls

  • If desired, use the Positioning Control Arrows to move the design one-mat-width with each click. 

  • This allows the user to cut several of the test mats from a full sheet of matboard as you calibrate the circles.

  • It shows the full sheet of matboard with a representation of the last mat cut displayed.

  • When you have finished calibrating your circles, click OK to return to the Configurations Screen when done.

Image Modified