changes.mady.by.user dani.simmonds
Saved on Apr 16, 2024
Select As Designed from the Outside Cut Options dropdown control to cut the Outside as originally designed on the CMC Z1, Z (9000z), 9000 and 8000+.
This can be helpful when coming from Traceor Nesting where you have already determined how you want the Outside to be cut.
If you have Remnant Trimming on, it will also cut off the scrap edge.
For Additional Information:
Select Options Menu > Cut Outside to cut the outside of the mat.
See /wiki/spaces/FrameShop8x/pages/1942506497 to turn on/off the Outside cut.
See Advanced Outside Options: Enable Outside Cut to turn on/off the Outside cut.
Default Settings:
See Admin > Editor for the default settings for Cutting the Outside.
See Admin > Cutting for the default settings for the Advanced Options.
See Admin > Cutting for the default settings for the Cut Mode.
See Admin > Cutting for the default settings for 90 Degree Outside.
See Admin > Cutting for the default settings for Tiling.
See Admin > Cutting for the default size for the Spacing between designs.
Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.
See: Remnant Trimming Function
...
