changes.mady.by.user dani.simmonds
Saved on Apr 15, 2024
Saved on Apr 16, 2024
Click the Cut Speeds button to open the Cut Speeds screen.
Default Settings: See Admin > Cutting for the default settings for the
Default Speed Percentage for Dense Material.
Use the Cut Speeds screen to select the Cutting Speed for each of the individual licensed Cartridges.
A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.
Enter the desired Cut Speed Percentage for each Cartridge type.
100% is cutting at Full Speed.
50% is cutting at Half Speed.
When that particular Cartridge is used next, it will use the new Cut Speed entered.
Slowing down the cut speed can help when cutting intricate designs to help prevent the Head from skipping on tight corners.
For Additional Information: See Variable Pressure Optimization (VPO) for more information.
This example shows that the 90 Degree Cartridge will cut at 50% speed.
...
This is a feature of the VPO Head; not all CMC models have this feature.
Click Extra Dense Material if this is extra dense material and you are cutting it with the 90° Cartridge.
Adjust the speed slidebar below the Extra Dense Materialcheckbox to the desired Cutting Speed Percentage and click OK.
For instance, 50% is 50% of the standard Cutting Speed.
When you click Cut, the Head plunges at the Home position and applies the current Air Pressure.
User is prompted to adjust the Head Pressure to the High Setting.
For Additional Information: See Adjusting the Air Pressure for Dense Matboard and Cutting an Extra Dense Layer with the 90 Degree Cartridge for more information.