Content Comparison

...

Advanced Outside Options

Info
The same Outside Cut Options are available on the Advanced Outside Options screen from the Cut Mode dropdown control.

Tip
Default Settings: See Admin > Cutting for the default settings for the Advanced Options. See Admin > Cutting for the default settings for the Cut Mode See Admin > Cutting for the default settings for Tiling. See Admin > Cutting for the default size for the Spacing between designs. See Admin > Cutting for the default settings for 90 Degree Outside.

Click the Set Advanced Options button on the Cut Preview screen.

On the Advanced Outside Options screen, set the Cut Mode to Shared Edge.
The Cut Mode matches the selections from the Outside Cut Options as described above.

The Shared Outside edges of the Tiled design will cut in one stroke.
If you have Remnant Trimming on, it will also cut off the scrap edge.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information: See Remnant Trimming for additional information on Trimming the Matboard Remnant.

Tip
Default Settings: See Admin > Cutting for the default settings for Remnant Trimming.

Expand

title	Remnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

See: Remnant Trimming Function

Version	Old Version 22	New Version 23
Changes made by	dani.simmonds	dani.simmonds
Saved on	Apr 16, 2024	Apr 16, 2024

Versions Compared

Key

Advanced Outside Options