Content Comparison

Not Cutting the Outside
Select Off from the Outside Cut Options dropdown control to not cut the Outside of the mat on the CMC Z1, Z (9000z), 9000 and 8000+. The Outside of the mat will not be cut. Optionally, select one of the other Outside Cut Options to cut the Outside of the mat.	Image Removed

Advanced Outside Options

The same Outside Cut Options are available on the Advanced Outside Options screen from the Cut Mode dropdown control.
Click the Set Advanced Options button on the Cut Preview screen.

Image Removed

On the Advanced Outside Options screen, set Cut Mode to Off. The Cut Mode matches the selections from the Outside Cut Options as described above.
Click OK.
Optionally, select one of the other Cut Mode options to cut the Outside of the mat.

Image Removed

Image Removed

Expand

title	Default Setting for Cutting the Outside

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Image Removed

Expand

title	Default Settings for the Advanced Options

The default setting for the Advanced Options can be set in the Admin > Cutting section.

Image Removed

Expand

title	Default Setting for the Default Cut Mode

The default setting for the Cut Mode can be set in the Admin > Cutting section.

Image Removed

Panel

For Additional Information: Select Options Menu > Cut Outside to cut the outside of the mat.

Panel

For Additional Information: See /wiki/spaces/FrameShop8x/pages/1942506497 to turn on/off the Outside cut.

Panel

For Additional Information: See Advanced Outside Options: Enable Outside Cut to turn on/off the Outside cut for the CMC Z1, Z(9000z), 9000 and 8000+.

Tip
Default Settings: See Admin > Editor for the default settings for Cutting the Outside.

Tip
Default Settings: See Admin > Cutting for the default settings for the Advanced Options.

Tip
Default Settings: See Admin > Cutting for the default settings for the Cut Mode.

Image Added